• In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 5.1 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.5" mouthpiece. Weight: 1 lb 6.7 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 5.6 oz
  • Sterling silver overlaid bit. 5 inch width with a 3.75" spade. Weight: 1lb 8.7oz Martin shares some thoughts on the bits he has in stock. In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouth piece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal we don’t have good communication. If the bit is too heavy it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker so its not to flimsy. This helps to keep the total weight of the bit with in the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black
  • Silver Headstall 306

    $500.00$525.00
    A gorgeous collection of handcrafted leather headstalls. This handcrafted headstall with beautiful silver conchos comes in a single or double ear configuration. Double sewn leather, soft calf lining, durable cowhide outer leather, various colors. All Silver is sterling overlaid and hand engraved. Average QH size. Made in the shop at Y6, Bruneau, Idaho 38" from end to end.  11.5" from bit hanger to split ear. **Special order for smaller or larger sizes available. ** NOT AVAILABLE for discounts or coupons
  • A great supplement two his previously released roping DVDs. In this DVD Martin puts a lot of emphasis on safety and efficiency. He shares some things in this video that will help develop correct muscle memory to stay safe and develop good roping fundamentals. Martin demonstrates some procedures that can help the more experienced roper or beginner alike to become a more versatile roper such as: loop building, rope handling, developing a good swing, basic deliveries, and tips for running rope and dallying. Please enjoy a sneak preview of this DVD:
  • A great supplement two his previously released roping videos. In this video Martin puts a lot of emphasis on safety and efficiency. He shares some things in this video that will help develop correct muscle memory to stay safe and develop good roping fundamentals. Martin demonstrates some procedures that can help the more experienced roper or beginner alike to become a more versatile roper such as: loop building, rope handling, developing a good swing, basic deliveries, and tips for running rope and dallying. Please enjoy a sneak preview of this video:
  • Ty Murray spent a week with Martin Black at Shoofly in Bruneau, Idaho, last Summer, along with Dr. Steve Peters.  A lot of interesting topics covered!! Please enjoy a sneak preview of this video:
  • This 5/8" hackamore features a rawhide noseband and heel knot with kangaroo bars. It has a rawhide core — Measures: 5" x 11.5" — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best  hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html
  • This 5/8" hackamore features a rawhide noseband and heel knot with kangaroo bars. It has a rawhide core — Measures: 5" x 11.5" — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best  hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you.
  • All Kangaroo 1/2"  Hackamore with rawhide core — Measures: 5" x 11" — 16 plait with 32 plait noseband. This hackamore can be used with a 5/8", 1/2" or 3/8" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand braided hackamore hanger, made to Martin's specifications. Hackamores can be purchased without a hanger upon request. Directions for measuring the best  hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html
  • Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 1.2 oz. Port Height: 2.5" Tall
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 1.4 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz
  • Silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 8.7 oz  Port 2.25" Tall
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 7/8" mouthpiece. Weight: 1 lb 5.1 oz
  • Silver inlaid bit. Half Breed mouthpiece, 5" width. Port 2.5" Tall Weight: 1 lb 4.9 oz.
  • Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 5.5 oz. Port Height: 2.25" Tall
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8 " mouthpiece. Weight: 1 lb 8 oz

Title

Go to Top