-
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 5/8" mouthpiece. Weight: 1 lb 2.8 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4" spade. Weight: 1 lb 6.5 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.75"spade mouthpiece. Weight: 1 lb 6.3 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.75"spade mouthpiece. Weight: 1 lb 4.3 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 6.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.25" mouthpiece. Weight: 1 lb 6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 7/8" mouthpiece. Weight: 1 lb 5.5 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 6.5oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 5.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.5" mouthpiece. Weight: 1 lb 6.7 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 5.6 oz -
Sterling silver overlaid bit. 5 inch width with a 3.75" spade. Weight: 1lb 8.7oz Martin shares some thoughts on the bits he has in stock. In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouth piece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal we don’t have good communication. If the bit is too heavy it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker so its not to flimsy. This helps to keep the total weight of the bit with in the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black -
A gorgeous collection of handcrafted leather headstalls. Double sewn leather, soft calf lining, durable cowhide outer leather, various colors. All Silver is sterling overlaid and hand engraved. Average QH size. 38" from end to end. 11.5" from bit hanger to split ear. **Special order for smaller or larger sizes available.** NOT AVAILABLE for discounts or coupons -
A gorgeous collection of handcrafted leather headstalls. This is a single ear headstall. Double sewn leather, soft calf lining, durable cowhide outer leather, various colors. All Silver is sterling overlaid and hand engraved. Average QH size. Made in the shop at Y6, Bruneau, Idaho 5/8" Leather with 1-7/8" Conchos 38" from end to end. 11.5" from bit hanger to split ear. **Special order for smaller or larger sizes available.** NOT AVAILABLE for discounts or coupons -
A gorgeous collection of handcrafted leather headstalls. This handcrafted headstall with beautiful silver conchos comes in a single or double ear configuration. Double sewn leather, soft calf lining, durable cowhide outer leather, various colors. All Silver is sterling overlaid and hand engraved. Average QH size. Made in the shop at Y6, Bruneau, Idaho 38" from end to end. 11.5" from bit hanger to split ear. **Special order for smaller or larger sizes available. ** NOT AVAILABLE for discounts or coupons -
A gorgeous collection of handcrafted leather headstalls. This is a single ear headstall with beautiful silver conchos. Double sewn leather, soft calf lining, durable cowhide outer leather, various colors. All Silver is sterling overlaid and hand engraved. Average QH size. Made in the shop at Y6, Bruneau, Idaho 1/2" Leather and 1-3/4" Conchos 38" from end to end. 11.5" from bit hanger to split ear. **Special order for smaller or larger sizes available.** NOT AVAILABLE for discounts or coupons -
A great supplement two his previously released roping DVDs. In this DVD Martin puts a lot of emphasis on safety and efficiency. He shares some things in this video that will help develop correct muscle memory to stay safe and develop good roping fundamentals. Martin demonstrates some procedures that can help the more experienced roper or beginner alike to become a more versatile roper such as: loop building, rope handling, developing a good swing, basic deliveries, and tips for running rope and dallying. Please enjoy a sneak preview of this DVD: -
A great supplement two his previously released roping videos. In this video Martin puts a lot of emphasis on safety and efficiency. He shares some things in this video that will help develop correct muscle memory to stay safe and develop good roping fundamentals. Martin demonstrates some procedures that can help the more experienced roper or beginner alike to become a more versatile roper such as: loop building, rope handling, developing a good swing, basic deliveries, and tips for running rope and dallying. Please enjoy a sneak preview of this video:
-
Ty Murray spent a week with Martin Black at Shoofly in Bruneau, Idaho, last Summer, along with Dr. Steve Peters. A lot of interesting topics covered!! Please enjoy a sneak preview of this video: -
All Rawhide 5/16" Bosal with rawhide core — 12 plait with 24 plait noseband. Choose between three options: The under bridle bosal measures 5" x 9" - it is intended to be used under a bridle with a 1/2", 3/8" or 5/16" bridle lead. The regular two-rein bosal measures 5" x 10" - it is intended to be used in a two-rein setup with a 3/8" 0r 5/16" mecate. The large two-rein bosal measures 5" x 10.5" - it is intended for the larger headed horse to be used in a two-rein setup with a 3/8" or 5/16" 22' mecate. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin’s specifications. Leather used may not match bosal color. Bosals can be purchased without a hanger upon request.
