• By popular demand, I’ve had this particular bit replicated for my customers. Each one is hand made with this particular oblong shape and precisely curved mouth. The rings and the mouth measure exactly the same.  I've found this bit to give the horse the best feel of any of snaffle I have tried.  Polished Steel 5" in width.
  • Black iron O-Ring snaffle.   This is a 5" width on the mouth.
  • Jeremiah Watt - Black steel eggbutt snaffle.  This is a 5" width on the mouth.
  • Jeremiah Watt -Stainless steel eggbutt snaffle.  This is a 5" width on the mouth.
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4"spade mouthpiece. Weight: 1 lb 4.7 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 5 and1/8"spade mouthpiece. Weight: 1 lb 7.7 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3" mouthpiece. Weight: 1 lb 7.2 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3"budeuano mouthpiece. Weight: 1 lb 7.9 oz
  • Sterling silver inlaid bit. Spade mouthpiece, 5" width. Weight: 1lb 4oz.  Port Height 2.25" Tall
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4.3 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/2" mouthpiece. Weight: 1 lb 2.7oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3" mouthpiece. Weight: 1 lb 7.2 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2" mouthpiece. Weight: 1 lb 4.9 oz
  • Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 2.5 oz. Port Height: 2.25" Tall
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.25"spade mouthpiece. Weight: 1 lb 4.8 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 3/8" mouthpiece. Weight: 1 lb 5oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 5/8" mouthpiece. Weight: 1 lb 2.8 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4" spade. Weight: 1 lb 6.5 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 6.1 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 8.4 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 7/8" mouthpiece. Weight: 1 lb 5.5 oz
  • In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz

Title

Go to Top