-
Kangaroo-Rawhide 5/8" Hackamore with rawhide core — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you. -
Kangaroo-Rawhide 5/8" Hackamore with rawhide core — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you. -
Kangaroo-Rawhide 5/8" Hackamore with rawhide core — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you -
All Kangaroo 5/8" Hackamore with rawhide core — 16 plait with 32 plait noseband.
This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you. -
All Kangaroo 5/8" Hackamore with rawhide core — 16 plait with 32 plait noseband. This hackamore can be used with a 3/4", 5/8" or 1/2" mane hair mecate, depending on your personal preference. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand-braided hackamore hanger, made to Martin's specifications. Leather used may not match hackamore color. Hackamores can be purchased without a hanger upon request. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html Small – Measures 5” x 10.5″ – This hackamore is for a small-headed horse, such as an Arabian or fine-boned QH. If your horse/pony is under 900 lbs and wears a small size halter; this hackamore is for you. Regular – Measures 5″ x 11.5″ – This hackamore is one size fits most. If your horse is between 900 and 1300 lbs and wears a regular size halter; this hackamore is for you. Large – Measures 5” x 12.5” – This hackamore is for a large-headed horse, such as a draft horse or large Warmblood. If your horse is over 1300 lbs and wears a large size halter; this hackamore is for you. -
A beautiful two tone Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosal can be purchased without a hanger upon request. -
A beautiful two tone Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosal can be purchased without a hanger upon request. -
A beautiful two tone Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosal can be purchased without a hanger upon request. -
A beautiful two tone heathered Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosal can be purchased without a hanger upon request. -
All Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosal can be purchased without a hanger upon request. -
Kangaroo-Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosals can be purchased without a hanger upon request. -
Kangaroo-Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosals can be purchased without a hanger upon request.
-
Kangaroo-Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosals can be purchased without a hanger upon request. -
Kangaroo-Rawhide 3/8" Bosal with rawhide core — Measures: 5" x 10 1/2" — 12 plait with 24 plait noseband. This bosal is intended to be used with a 1/2", 3/8" or 5/16" mane hair mecate or bridle lead. Martin Black is very particular about how his gear functions, the bosal hanger plays a large role in that. Every bosal comes with a hand braided bosal hanger, made to Martin's specifications. Bosals can be purchased without a hanger upon request. -
Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 1.2 oz. Port Height: 2.5" Tall -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 3.4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 3/8" mouthpiece. Weight: 1 lb 9oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 2.8 oz. Port Height: 2 and 1/8" Tall -
Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 5.5 oz. Port Height: 2.25" Tall -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8 " mouthpiece. Weight: 1 lb 8 oz
