-
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 3.5 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/2" mouthpiece. Weight: 1 lb 2.7oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3" mouthpiece. Weight: 1 lb 7.2 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2" mouthpiece. Weight: 1 lb 4.9 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 3/8" mouthpiece. Weight: 1 lb 5oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 5/8" mouthpiece. Weight: 1 lb 2.8 oz -
Sterling silver inlaid bit. Half Breed mouthpiece, 5" width. Weight: 1 lb 1.2 oz. Port Height: 2.5" Tall -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4" spade. Weight: 1 lb 6.5 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.75"spade mouthpiece. Weight: 1 lb 6.3 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.75"spade mouthpiece. Weight: 1 lb 4.3 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 6.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.25" mouthpiece. Weight: 1 lb 6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2.28" mouthpiece. Weight: 2 lb 7.6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 5.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.5" mouthpiece. Weight: 1 lb 6.7 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 5.6 oz -
Martin Black is one of America's most celebrated horsemen, one who has spent his life ranching, riding, training horses, starting young horses, working cows, and roping in the Great Basin tradition. Martin tirelessly shares his knowledge and experience with folks serious about improving themselves and their horses. He has written extensively, authoring both books (the Western Horseman book on Cow Horse Confidence and co-authoring the ground-breaking Evidence-Based Horsemanship) and articles that share his thoughts and experiences on horsemanship. Now for the first time, all of Martin's major articles, most from Eclectic Horseman magazine, are being collected into three handy volumes titled: The Essential Martin Black. This book, "Volume No. 1, Horseback," includes 28 articles with photos relating to riding topics. Whether you're a long time student of Martin's or just beginning to explore the realm of horsemanship, Martin's articles will get you thinking and offer ideas for improving your horse relationships. -
Martin Black is one of America’s most celebrated horsemen, one who has spent his life ranching, riding, training horses, starting young horses, working cows, and roping in the Great Basin tradition. Martin tirelessly shares his knowledge and experience with folks serious about improving themselves and their horses. He has written extensively, authoring both books (the Western Horseman book on Cow Horse Confidence and co-authoring the ground-breaking Evidence-Based Horsemanship) and articles that share his thoughts and experiences on horsemanship. Now for the first time, all of Martin’s major articles, most from Eclectic Horseman magazine, are being collected into three handy volumes titled: The Essential Martin Black. This book, Volume No. 2, Philosophy, includes 24 articles with photos relating to riding topics. Whether you’re a long time student of Martin’s or just beginning to explore the realm of horsemanship, Martin’s articles will get you thinking and offer ideas for improving your horse relationships. Softcover, 114 pages, black and white photos by Kim Stone. -
A great supplement two his previously released roping DVDs. In this DVD Martin puts a lot of emphasis on safety and efficiency. He shares some things in this video that will help develop correct muscle memory to stay safe and develop good roping fundamentals. Martin demonstrates some procedures that can help the more experienced roper or beginner alike to become a more versatile roper such as: loop building, rope handling, developing a good swing, basic deliveries, and tips for running rope and dallying. Please enjoy a sneak preview of this DVD:
