-
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 3/8" mouthpiece. Weight: 1 lb 9oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 3.4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.25" mouthpiece. Weight: 1 lb 6oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 3.5 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4" mouthpiece. Weight: 1 lb 7.4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 6.5oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 8.4 oz -
Frank Barnett joined Martin Black on February 13, 2024 for a virtual session discussing how to make a correction - Getting In and Getting Out - Balance and ReBalance An incredibly informative session on understanding how to change one footfall to make a difference. Martin and Frank have spent years working with colts, young horses and older horses in need of a new way of riding. They have learned what works and what doesn't. If you have ever ridden a horse and they have done something you didn't want and you want to "fix it", this is a clear virtual session with over 90 minutes of video and photographic examples. When Martin first meet Frank he wasn’t impressed by his horses. Frank always had some tough horses that were for the most part really bothered. But Frank had that dry cowboy sense of humor that brought Martin back for more visits. It wasn’t long before Martin realized that these nasty horses Frank was working were getting better. Frank wasn’t training these horses, he was setting them up to figure out things for themselves. They were given bad information by previous riders before Frank got them in his program. He was doing things that Martin hadn’t seen done before and having success bringing these horses around that many of “professionals” had failed with. Frank is also a walking encyclopedia when it comes to biomechanics of the horse, and everything written by the military and dressage Masters, or any other worthwhile books written on horses. Join these two lifelong horse scientists as they share with each other, and you, on how it all comes together for the horse.They have been featured together in Western Horseman, December 2019 read more here Enjoy this 120 minute unedited virtual session -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/2" mouthpiece. Weight: 1 lb 2.7oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 3/8" mouthpiece. Weight: 1 lb 5oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8" mouthpiece. Weight: 1 lb 4.3 oz -
Kangaroo-Rawhide 3/4" Hackamore with rawhide core — Measures: 5" x 12" — 16 plait with 32 plait noseband. This hackamore is intended to be used with a 3/4" or 5/8" mane hair mecate. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand braided hackamore hanger, made to Martin's specifications. If you wish to purchase a hackamore without a hanger, please contact us. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html -
Kangaroo-Rawhide 3/4" Hackamore with rawhide core — Measures: 5" x 12" — 16 plait with 32 plait noseband. This hackamore is intended to be used with a 3/4" or 5/8" mane hair mecate. Martin Black is very particular about how his gear functions, the hackamore hanger plays a large role in that. Every hackamore comes with a hand braided hackamore hanger, made to Martin's specifications. If you wish to purchase a hackamore without a hanger, please contact us. Directions for measuring the best hackamore fit: https://martinblack.net/on-the-road-with-martin-black/getting-the-right-hackamore.html -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 4.5" mouthpiece. Weight: 1 lb 6.7 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 5/8" mouthpiece. Weight: 1 lb 2.8 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3 and 5/8" mouthpiece. Weight: 1 lb 5.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2 and 1/8 " mouthpiece. Weight: 1 lb 8 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 2" mouthpiece. Weight: 1 lb 4.9 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 6.1 oz -
In my experience, younger horses are going to be more sensitive in the early stages and get along better with a lighter bit, around 1.5 pounds more or less, and after a few years they get along better and are more sensitive to a bit around 2 pounds. The difference between a lower port and a spade mouthpiece could make close to .25 pound difference. When a bit is used as a signal device its important to have the right signal. If it’s too light and doesn’t give enough signal, we don’t have good communication. If the bit is too heavy, it can be too loud and intimidating and not have a good signal either. The movement of the bit before the curb strap comes tight is a feel, referred to as signal. After the curb strap is tight the horse feels leverage that can be measured in pounds. These bits are intended to be signal devices. If the bit is strictly used as a leverage device the weight of the bit has little to do with feel, it might as well be heavy and durable. We have a maker working with us now that is producing the kind of bits that we really like. A cheek that has more surface area is made thinner to be lighter weight, and a cheek that has less surface area is thicker, so it is not to flimsy. This helps to keep the total weight of the bit within the proper weight range. Again, the equipment we offer is patterned after the equipment that I have experienced success with and has been used for generations. Martin Black Sterling silver inlaid bit. 5" width with a 3.5" mouthpiece. Weight: 1 lb 5.6 oz
